GUANGDONG KEJIAN INSTRUMENT CO.,LTD
Guangdong Kejian Instrument Co., Ltd Focus On Researching Testing Equipment 20 Years
Add to Cart
Automatic Cropping Plastic Melt Flow Index Machine Price Plastic Point Load Tester with Φ2.095±0.005mm
Introduction:
Melt Index Tester meets the standards GB/ T3682-2000, the main parameters of Melt Index Tester also meet the standard requirements of ISO1133-97, ASTM1238, JIS, ect.. It is used in polyethylene, polypropylene, polystyrene, ABS, polyethylene amide, fiber resin, acrylic, POM, fluorine plastic, polycarbonate, and other plastic materials, to measure MFR and MVR. It is widely applied to various industries like plastic production, plastic products, petrochemical, and related institutions, research institutes and inspection departments.
| Machine size(W*H*D) | 250*510*350mm |
| Power | AC220V±10% 50Hz |
| Barrel parameters | Inner hole 9.55±0.025mm |
| Pistons parameters | Piston head: 9.475±0.015mm |
| Piston length | H=6.35±0.1mm |
| Paramters | Extrusion hole 1=2.095±0.005mm |
| Temperature parameter | With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade |
| Temperature rangeradius | 400 degree centigrade |
| Temperature accuracyblade to jawand dust collector | ±0.2 degree centigrade |
| Display resolution | 0.1degree centigrade |
| Maximum comsuption | < 600W |
| Temperature recovery time | less than 4 min. |
| Weight parameters | |
| Weight accuracy | ±0.5% |
| Basic configuration | 0.325kg, 1.kg, 2.1kg, 3.kg, 5.kg, 10.0kg, 12.kg, 21.6kg |
| Position detection | |
| Loop distance from up and down | 30mm |
| Control precision | ± 0.1mm |
| Test flow control | |
| Times of cutting the material | 0~10 times |
| Material cutting interval | 0~999s(set reference Table 2) |
| Control flow reaches the set temperature without volatility | |
| Barrel temperature time | 15 min. |
| Material be installed | 1 min |
| Material sample temperature recovery time | 4 min. |
| When binder set | 1min |
The main technical parameters:
| Model |
Plastic Melt Flow Index Tester |
| Temperature range | RT~400℃ |
| Temperature accuracy | ±0.2℃ |
| Temperature resolution | 0.1℃ |
| Heating time | <30 min |
| Temperature recovery time | <4 min |
| Time accuracy | 0.01s |
| Standard die | Tungsten carbide Diameter: Φ2.095±0.005mm Length: 8.000mm±0.020mm |
| Feed cylinder | Inner diameter: Φ9.550±0.025mm Length: 160mm |
| Diameter of piston | Φ9.475±0.015mm |
| Length of piston head | 6.350±0.100mm |
| Measuring range | 0.1~100g/10min |
| Cutting mode | Manual or automatic, selectable |
| Standard test loads | 8 grades |
| Power supply | AC220V, 50Hz, 800w |
| Dimensions | 260mm×400mm×600mm (L×W×H) |
| Weight | 60kg |
Melt Flow Indexer is based on designed and manufactured according to latest national and international standards. Its advantage to combined various machine of domestic and international models: compact structure, beautiful appearance Based on designed and manufactured according to latest national and international standards.
Plastic Melt Flow Index Machine Price Plastic Point load Tester
Characteristic:
1.Using advanced electronic measurement technology, liquid crystal display test results, the micro printer output results and calculating the quality of the melt flow rate (MFR) or melt volume flow rate (MVR) (note: single determination value and many times the average of the cutting material).
2.Tester compact structure, beautiful, the control system can real time measurement and display temperature numerical, has the upper limit temperature protection, constant temperature sound reminders, response time tip etc. Function. The use of advanced PID control technology and high speed and high resolution sampling circuit, make the machine in constant temperature is the following characteristics:
A: heating speed, the dinky overshoot.
B: constant temperature and high precision.
C: in the packing after, can quickly restored constant temperature condition.
RFQ:
Why choose us?
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
2. Excellent after sale service:
1 YEAR warranty. If you have any problems during testing process, we promise we will give you a reply with 24 hours and solution provide within 3 working days. What you need to do is to send us the controller.
3. Good Packaging:
Covered with air bubble film before put the machine into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
Pictures:
